What Is The Best Way To Extract CBD From Hemp?
Keep reading to find out how to extract CBD, and which method produces the highest-quality CBD oil. While they all harness the power of CBD, they don’t all achieve the same degree of purity.
Why does CBD extraction matter?
To produce CBD oils, cosmetics or supplements, you must first extract the cannabinoid from raw plant material. Fortunately, the most abundant source of CBD is hemp, a selectively bred crop used extensively in dozens of commercial industries.
Although there are many ways to extract CBD from hemp, some methods are much more efficient and safer than others. It’s essential to know the difference, since how you extract CBD affects the purity and efficacy of the final product.
What are the options for extracting CBD?
Below, you will find a breakdown of some of the most common extraction techniques used, including their main pros and cons.
Solventless CBD extraction (by hand)
How does one make CBD extracts without using a solvent? Simply enough, you just have to apply heat, pressure, or a bit of friction to hemp flowers and leaves. How do you do that, you wonder? Well, if you freeze hemp flowers, you can shake the small trichomes loose and gather them together. These trichomes, as you might know, contain the full spectrum of cannabinoids and terpenes found in the hemp plant.
Pros of solventless extraction
• No additional equipment needed
• Makes use of the whole hemp plant
• Cheapest method of extraction
Cons of solventless extraction
• Yields are low and impractical
• No way of controlling purity, with minimal levels of CBD
• CBD extract contains plant material and unwanted cannabinoids
Olive oil CBD extraction
First, to perform olive oil extraction at home, you need to make sure your plant material is decarboxylated. In short, that means it undergoes the process of acidic cannabinoids being activated via heat. That, of course, happens when you smoke or vape it, but it can also happen if you put it in the oven.
Once decarboxylated, mix your plant matter with olive oil and heat it on the stove for several hours. CBD, other cannabinoids and essential terpenes will bind to the fats in the oil, creating an infused product. Finally, the mixture is left to cool before being filtered to remove any leftover plant material.
Pros of olive oil extraction
• Can be performed easily at home
• Relatively safe, with no previous extraction experience needed
• Greater degree of purity compared to solventless extraction
Cons of olive oil extraction
• Little control over the final extract
• Weak and unreliable CBD content compared to more professional methods
• Not suitable for commercial sale
Basic solvent CBD extraction
Solvent extraction is a rudimentary and risky practice, but it has fans. Essentially, it involves running a liquid solvent through decarboxylated hemp to remove cannabinoids and terpenes. The usual solvents include butane, ethanol, and hexane, so you need to safely evaporate any residual solvent post-extraction to ensure usable CBD extract.
Pros of solvent extraction
• Cheap and requires relatively small amounts of equipment
• Solvent CBD extracts have a respectable degree of purity
• Easy to scale for commercial production
Cons of solvent extraction
• Working with solvents can cause injury if not used correctly, they are highly flammable
• The oil can remain contaminated with solvent, which is dangerous for the end-user
• Higher temperatures risk destroying some essential terpenes and other smaller compounds
Supercritical CO₂ CBD extraction
In this method, CO₂ is manipulated to enter a supercritical state. With characteristics of both a gas and a liquid, it’s pumped through raw plant material under controlled conditions, stripping away essential terpenes and cannabinoids without damaging them.
Pros of supercritical CO₂ extraction
• Allows for the extraction of clean and safe concentrates without the use of additional additives or contaminants.
• Offers highly efficient yields, getting the most out of the hemp plant.
• CO₂ extraction is sustainable and environmentally friendly
Cons of supercritical CO₂ extraction
• Co₂ extraction is an industrial process, making it highly expensive
• Requires expertise to perform correctly
Which CBD extraction method is the best?
CO₂ extraction has significant advantages over other methods of producing CBD oil. First, you can pump supercritical CO₂ through hemp in such a way that it selectively picks up the cannabinoids and other compounds, leaving everything else behind.
Second, since it uses CO₂, it produces CBD oils free from chemicals and contaminants. And, when the extraction process is over, you can either reuse the CO₂ or release it safely back into the atmosphere. Thanks to this outstanding level of control, supercritical CO₂ has become a leading tool extraction and one that Cibdol uses to create all of its CBD extracts.
However, highly sophisticated extraction is only the beginning. Cibdol goes above and beyond for its customers, publishing a detailed analysis of every CBD product batch. Performed by an independent third-party, these analyses indicate levels of all common cannabinoids, allowing you to make the most informed decision possible.
You can browse the complete selection of our third-party tested CBD products from the Cibdol store, including CBD oils, cosmetics, supplements and isolates. Or, discover more about independent testing and what its means using our beginner-friendly CBD Encyclopedia.
If you want to learn more about extracting CBD, including which methods produces the highest-quality CBD oils, and which methods you should avoid.
How is CBD extracted from cannabis?
Copy article link to clipboard.
Link copied to clipboard.
All the cannabidiol (CBD) you find in your favorite gummies, drinks, and oils has to go through an extraction process first. CBD, for those who don’t know, is a cannabinoid found in cannabis. Extracting CBD involves isolating the chemical compound from the surrounding plant material and distilling it in high concentrations. Research has shown that cannabinoids may have beneficial effects on physical and mental health, and extraction makes it possible to consume more of those cannabinoids with less effort.
All the cannabidiol (CBD) you find in your favorite gummies, drinks, and oils has to go through an extraction process first. Photo by: Gina Coleman/Weedmaps
In this article, you’ll learn about how CBD is extracted from hemp and cannabis, as well as which extraction process yields the best results.
How to extract CBD from cannabis
Extracting cannabinoids from cannabis or hemp can be as simple as making cannabutter at home. But for large-scale manufacturing purposes and more potent results, there are two primary methods for efficient CBD extraction. Each method presents distinct benefits in creating a high-quality, highly-potent CBD product.
Carbon dioxide (CO2) extraction method: Carbon dioxide is a versatile gas with a variety of commercial uses, including extracting compounds from plant matter. The CO2 method uses the gas in its normal state as well as in supercritical liquid form. Through the use of a pressurized chamber, called a closed-loop extractor, CO2 gas is compressed until it becomes a liquid. The liquid is forced over the cannabis material where it strips away cannabinoids like CBD. The entire solution is brought back to temperatures and pressures at which the CO2 reverts to gas and evaporates, leaving behind the CBD extracted out of the cannabis plant material.
Andrew Leising, VP of Strategic Sourcing for Balanced Health Botanicals, elaborated on the process: “CO2 is a scalable and highly versatile form of extraction. There are CO2 extraction units built to process anywhere from 1 to 1,200 pounds of biomass in a single run. With CO2 extraction, you can not only extract cannabinoids on a large scale efficiently, you can extract specific compounds like terpenes.”
Terpenes are the naturally-occurring compounds that infuse cannabis with its signature aromas and flavors as well as potential therapeutic benefits. Full-spectrum CBD products rely on extraction methods that can keep these compounds intact.
Solvent extraction method: The solvent extraction process is similar to using CO2, but it’s notably cheaper and faster. Butane has long been used in cannabis extraction but ethanol and propane are also popular. This method also uses a closed-loop system wherein the liquid butane, propane, or ethanol washes over the cannabis, releasing the CBD, other cannabinoids, and terpenes. The solvent then has to be carefully heated or cooled to separate the solvent from the extracted compounds without damaging them. The main drawback of solvent extraction is that some solvents may extract impurities from the cannabis plant material, which could give the end-product an unpleasant taste.
Both of these extraction methods use highly combustible chemicals and can be dangerous. Only trained professionals in properly equipped labs should attempt any kind of chemical extraction.
How long does CBD extraction take?
The process of CBD extraction is fairly expedient and can take place in a single afternoon. According to Leising, it takes about three to four hours to process up to 1,200 pounds of cannabis.
What happens after CBD oil extraction?
After CBD oil is extracted from hemp or cannabis, the process of winterization begins. This process removes the impurities and unwanted elements that made it through the extraction process, such as fats, lipids, and waxes. In essence, winterization transforms crude oil into purified oil. The process gets its name from a step which involves mixing the extracted oil with ethanol and freezing the solution. The impurities and undesirable compounds solidify and fall out of the solution, which is then passed through a filter, separating wax, lipids, and fats from the oil. The final step involves removing the ethanol from the solution.
CBD may go through further refinement after winterization to create the purest possible CBD product. The additional refinement phase is known as short-path distillation. The process is similar to winterization, but it involves using reduced pressure to allow lower-than-normal boiling temperatures. The solution is heated just enough for the impurities to boil off and travel a short path out of the system, leaving pure CBD oil to distill into the collection chamber.
Which CBD extraction method is best?
Many cannabis experts agree that the CO2 method is best for producing premium oil that stays potent longer because the hemp or cannabis compounds remain stable during this type of extraction. Full-spectrum CBD oil, prized for its potency and purity, is made via CO2 extraction. Other methods may destabilize the compounds, potentially creating lower-quality CBD oil with a shorter shelf life.
Leising agrees that the CO2 method is superior. As he shared, “CO2 is generally preferred for the extraction of cannabinoids that are meant for ingestion or further refinement. Due to the nature of the extraction process, you can be assured that your extracted oil will be free of any residual solvents, microbes, and fungi.”
The same is not true for the solvent method, which often fails to eliminate such impurities.
Can I extract CBD oil at home?
It depends on what extraction method you’re considering. Let’s say you have a thriving indoor cannabis garden and want to consume the cannabis you’ve harvested without having to smoke it all. You can safely make CBD oil at home via a simple infusion and consume a high concentration of cannabinoids without risking life or limb.
You can safely make CBD oil at home via a simple infusion and consume a high concentration of cannabinoids without risking life or limb. Photo by: Gina Coleman/Weedmaps
What you don’t want to do is attempt to make a CBD extract using inedible solvents or CO2. Leising explained, “You cannot perform CO2 extractions at home. The equipment is cost prohibitive, and if you don’t know how to operate the equipment, it could be extremely dangerous. The equipment runs at extremely high pressures between 2500-4000 PSI and could be very dangerous if the operator is not properly trained.”
Bottom line: don’t risk your life for CBD oil. Visit a reputable dispensary and shop for high-quality, lab-tested products instead.
Learn about the two methods for large-scale CBD extraction and how they affect the final product.